Tobacco Flavoring Spray - Mango for Cigarette

All of our flavorings come pre-mixed and in 2oz spray bottles and are ready to apply directly to tobacco.

FOR FRONTO/GRABA USE:

1. Open and fan out your tobacco leaf.

2. Place your fanned out leaf on a clean surface.

3. Spray the tobacco leaf with the bottle until it's surface is coated with the tobacco flavor.

4. Leave your tobacco leaf out to dry for at least 10 hours.

5. If your tobacco leaf is still too moist or burns unevenly, leave it out to dry for additional time. If your tobacco leaf becomes too dry, you can add a little more flavoring or water to rehydrate.

FOR CIGARETTE AND PIPE USE

1. After tobacco has dried and cured properly, removes stems and shred tobacco into the size you will use when smoking.

2. Place a pound of shredded tobacco into a large open tray and start misting the tobacco with the flavoring while stirring the tobacco thoroughly. 2 ounces of our pre-mixed flavoring will flavor one pound of tobacco.

3. After flavoring has been applied, cover container for 3-4 hours to allow tobacco to fully absorb flavoring, then spread tobacco out on a table or shelf to dry. Stir the tobacco every 4 hours or so to facilitate drying.

4. After 24 hours, tobacco should be ready to use. We recommend sampling a batch to insure that it has dried adequately, if it has not, allow to dry until burns evenly when lit.

Store bought tobacco that has been allowed to dry out and would no longer be smoke-able can be given new life simply by adding our flavorings, using the above process.